* Allow colorisation types to not completely crowd each other out.
* For example, it's possible for invincibility + grow to flicker Invincibility, Eggman mark, and grow colours if the conditions for each type of flash are true on different frames!
- Rename to Lightning Shield (it keeps fucking me up when I want to kartgiveitem it to myself)
- Fix inflictors causing damage being considered damage hitlag. Fixes the player using Lightning Shield being in damage hitlag state (most notable in the DI branch because hurting someone with it lets you DI afterwards, which also fucks with your turning)
- Rewrote attack function to use custom blockmap search instead of P_NukeEnemies.
- It can no longer attack below you, only above & around you.
- Increased the attack radius, so that it actually lines up with the sprites...
- Fixed extremely inconsistent ring blockmap search by moving it to playerafterthink (don't ask me why)
- Rings get joulsted by Lightning Shield when you pass by them without
- Added MAXRADIUS to the blockmap checks for lightning shield & mines, to reduce blockmap inconsistencies
Squashed SRB2 2.2 Public uncapped without UDMF merge
Implement interpolation at the renderer level
Instead of interpolating thinkers, we interpolate mobjs inside the
renderer. Further interpolation is TBI.
Place Frame Interpolation in "Experimental" video options header
This seems like an appropriate way to describe the feature for now.
Add smooth level platter under interpolation, `renderdeltatics`
`renderdeltatics` can be used as a standard delta time in any place,
allowing for smooth menus. It will always be equal to `realtics`
when frame interpolation is turned off, producing consistent
framerate behavior everywhere it is used.
Add smooth rendering to save select screen
Add smooth rendering to Record/NiGHTS Attack, F_SkyScroll
Ensure viewsector is accurate to viewx/viewy
This fixes a potential crash in OpenGL when changing between levels.
Ensure + commands get executed before map start
Always have precise_t defined
Fix misc dropshadow issues
Reset view interpolation on level load
Remove unnecessary precipmobj thinker hack
Add reset interpolation state functions
Reset precip interpolation on snap to ceil
Reset mobj interp state on TeleportMove
Only swap view interp state if a tick is run
Run anti-lag chasecam at tic frequency
Fixes jittery and unstable chasecam in high latency netgames
Homogenize mobj interpolations
Add sector plane level interpolations
Add SectorScroll interpolator
Add SideScroll interpolator
Add Polyobj interpolator
Intialize interpolator list at a better time
Delete interpolators associated with thinkers
Interpolate mobj angles and player drawangle
Interpolate HWR_DrawModel
Add functions to handle interpolation
Much less code duplication
P_InitAngle, to fix angle interpolation on spawning objects
Fully fix drop shadows
It used the thing's floorz / ceilingz directly -- that wouldn't account for interpolated coordinates.
Do not speed up underwater/heatwave effect in OpenGL
Closer OpenGL underwater/heatwave effect to Software
Interpolate from time of previous tic
Previously interpolated from last 35th of a second, which
may be offset from game time due to connection lag.
Consider this the proper fix to 6ecac4159a too.
Calculate FPS stuff even if frame is skipped
I decided ultimately to actually keep the frame skip optimization disabled, because I think it is actually a little bit helpful that you can still get accurate rendering perfstats while paused, however if we decide otherwise then we can have this optimization back without making the game act like it's lagging.
Keep rect in memory
Feel better about this than creating one all da time
Lots of FPS stuff
- Disabled VSync, due to the numerous problems it has.
- Instead, added an FPS cap.
- Frame interpolation is now tied to fpscap != 35.
- By default, the FPS cap is set to the monitor's refresh rate.
- Rewrote the FPS counter.
(This also consolidates several more commits ahead of this
fixing various issues. -eid)
Misc changes after Kart cherry-picks
Fix renderdeltatics with new timing data
Update mobj oldstates before all thinkers
Allow FPS cap values
Adjust how FPS cap is checked to improve FPS stability
Fix precip crash from missing vars
Improve the framerate limiter's timing for extreme stable FPS
Handle the sleep at the end of D_SRB2Loop instead of the start
Simplifies logic in the other parts of the loop, and fixes problems with it frequently waiting too long.
Reset mobj interp state on add
Add mobj interpolator on load netgame
Move mobj interpolators to r_fps
Dynamic slope interpolators
I_GetFrameTime to try and improve frame pace
(It doesn't feel that much better though.)
Move I_FinishUpdate to D_SRB2Loop to sync screen updates with FPS cap, use timestamps in I_FrameCapSleep to simplify the code
Fix plane interpolation light level flickering
Fix flickering plane interpolation for OpenGL in the exact same way
Funny OpenGL renderer being at least 50% copy-pasted Software code :)
P_SetOrigin & P_MoveOrigin to replace P_TeleportMove
Convert P_TeleportMove use to origin funcs
Revert "P_InitAngle, to fix angle interpolation on spawning objects"
This reverts commit a80c98bd164a2748cbbfad9027b34601185d93f5.
Waypoint polyobjects interpolate z & children
Add interpolation to more moving plane types
Adds interpolation to the following:
- Crumbling platforms
- Mario blocks
- Floatbob platforms (this one works really strangely due to two thinkers, maybe double-check this one?)
Reset overlays interp states each TryRunTics
Interpolate model interpolation (lol)
Use interp tracer pos for GL linkdraw
Papersprite angle interpolation
Makes the ending signpost smooth
Move intermission emerald bounce to ticker
Bring back shadows on polyobjects
Also optimizes the method used so rings can show their shadows too. Using just the subsector is a tad bit imprecise admittedly but any more precise methods get really laggy.
Fix a bunch of ticking in hu_ drawing functions
Revert "Reset overlays interp states each TryRunTics"
This reverts commit a71a216faa20e8751b3bd0157354e8d748940c92.
Move intro ticking out of the drawer
Adjust 1up monitor icon z offsets
Fixes interpolation issues with 1up monitors.
Delta time choose player menu animations
Add drawerlib deltaTime function
Interpolate afterimages further back
Use old sleep in dedicated mode
Clamp cechotimer to 0
Fixes issues with cechos staying on-screen and glitching out
(NiGHTS items for example).
Revert "Remove unnecessary precipmobj thinker hack"
This reverts commit 0e38208620d19ec2ab690740438ac2fc7862a49e.
Fix frame pacing when game lags behind
The frame timestamp should've been made at the start of the frame, not the end.
Fix I_FrameCapSleep not respecting cpusleep
Jonathan Joestar bruh
Allow dedicated to use precise sleep timing again
Instead of only using one old sleep, just enforce framerate cap to match TICRATE.
Make Lua TeleportMove call MoveOrigin
Reset Metal fume interp state on appear
Add interpdebug
Put interpdebug stuff in perfstats instead
Add timescale cvar
Slow the game down to debug animations / interpolation problems! Speed it up if you need to get somewhere quickly while mapping!
Enable timescale outside of DEVELOP builds
It has NETVAR, so it should be fine -- put an end to useful debugging features excluded in multiplayer!
Force interpolation when timescale != 1.0
Reset old_z in MT_LOCKON think
Fixes interpolation artifacting due to spawn pos.
Fix cutscenes in interp
Fix boss1 laser in interp
Interpolate mobj scale
Precalculate refresh rate
Slower PCs can have issue querying mode over and over. This might kinda suck for windowed mode if you have different refresh rate displays but oh well
Fix interp scaling crashing software
Reset interp scale when Lua sets .scale
Disable angle interp on fresh mobjs
Fix interp scale crash for hires sprites
Interp shadow scales
Copy interp state in P_SpawnMobjFromMobj
Fix multiplayer character select
Don't interpolate mobj state if frac = 1.0
Fix Mario block item placement
Interpolate spritescale/offset x/y
Fix offset copies for SpawnMobjFromMobj
THANKS SAL
Add Lua HUD drawlists
Buffers draw calls between tics to ensure hooks
run at the originally intended rate.
Rename drawerlib deltaTime to getDeltaTime
Make renderisnewtic is false between tics
I know what I'm doing! I swear
Completely refactor timing system
Time is now tracked internally in the game using I_GetPreciseTime
and I_UpdateTime. I_Time now pulls from this internal timer. The
system code no longer needs to keep track of time itself.
This significantly improves frame and tic timing in interp mode,
resulting in a much smoother image with essentially no judder at
any framerate.
Ensure mobj interpolators reset on level load
Ensure view is not interpolated on first frame
Disable sprite offset interpolation (for now)
Refactor timing code even more
System layer is greatly simplified and framecap
logic has been moved internally. I_Sleep now
takes a sleep duration and I_SleepDuration
generically implements a precise sleep with spin
loop.
Adjust spawned mobj z by gravity inversion
Only check VERTICALFLIP for old_z calc
Fix Marathon Mode menu for uncapped
Move screenshot code before timing
Only play emerald hunt sounds on new tics
Restore deleted zofs (fixes signpost sparkles etc)
Revert to before screenUpdate boolean was added
Was done this way for the sake of an older version of uncapped's timing; now that the new timing is much better, I decided it should remain as close to pre-uncapped as it can be.
Run UpdateLevelInterpolators in preticker
FixesKartKrew/Kart-Public#10
Run UpdateMobjInterpolators in preticker
Reset view interp in preticker
Add per-split player view resets
While I finally pushed to do this because of the epic Blue Sphere reference, I was kinda thinking about doing this for a while, because it gives more room for bots to level up during Hard GP.
I thought about just making the new level cap go up normally, but I decided on keeping the bots' passive buffs (like top speed & ring boosts) go up linearly, while rubberbanding range is kept the same.
I don't think I can properly explain it, but this basically means level 13s are a touch harder than old level 9s before, and new level 9s are touch easier than old level 9s. Basically think of it as more level range than actually making the bots harder.
The expanded range means that Hard GP can start off easier, but end harder. (And of course, Master is even more ridiculous c:)
* Actually add descriptions for the boss-related functions into k_boss.h.
* Introduce K_ResetBossInfo, an internal-only function for handling situations where it needs to be cleared.
* Fix a bug where bossinfo wasn't reset when using the map command to go to a battle map after having been in a boss.
* Fix some bugs where you could provide magnitudes out of the desired range to K_InitBossHealthBar and K_UpdateBossHealthBar.
This will be necessary when newmenus comes around and it is no longer advantageous to have a menu for testing bosses, given they won't be a headline feature in v2 or accessible via multiplayer at this time.
This is the function that controls whether a bunch of music-related function (and also whether certain error messages get printed).
* P_IsLocalPlayer now supports party players (currently untested, but the code is pretty airtight).
* P_IsLocalPlayer now always returns false in replays.
* P_IsMachineLocalPlayer now exists for the one situation the game determines local players that actually has a net-related function (kicking illegal character changes).
* Invincibility/grow sfx now operates based on whether the player is NOT local (it used to be whether it was NOT a displayplayer).
* Refactored P_SpectatorJoinGame to make future team support easier, and also reset the relevant camera focus, rather than always the consoleplayer's.
* Fix viewpoints on non-local players having overlapping viewpoint text.
* Fix a technically invalid read in D_SetupVote.
* If the third map on the voting screen has a different gametype, don't interact with the buffer.
* Fix the inttime 0 setting, since I was in y_inter.c and testing quick map changes.
* Don't overwrite the first player's name when joining with multiple local splitscreen players. (resolves#151)
* The defaults for unprovided names are now consistently "Player A/B/C/D" as opposed to some being letter-based and some being number-based.
* Send local player info once per local splitscreen player, rather than n^2 times (where n is the number of local splitscreen players).
* Since the packet *requires* four names to be sent every time you join a server, send dummy names for local splitscreen players who aren't connecting, instead of your actual cvars (no data leakage you didn't ask for!)
Introduces a new command that lists all mapthings by their doomednum and MT_ constant string.
* Can distinguish between hardcode and freeslots.
* Can detect double definition.
* With single argument, returns messages relating to that single doomednum.
* With two arguments, returns messages for that doomednum range inclusive (can swap if wrong way around).
The below image does not include what happens when it is called without any arguments, as that is long enough to only be legible in the logfile.
https://cdn.discordapp.com/attachments/369137273700089867/829007068333342720/unknown.png
We had SEENAMES disabled before, and vanilla removed the define, so I went ahead and removed it. Repurposed the old seenames console variable for our nametags.
It's no secret that holding down a button a lot can fuck with your wrists and fingers. It's too late for me to be damageless, but I can at least create an option to reduce further harm.
This accessibility feature, when enabled (kickstartaccel and kickstartaccel2/3/4 in the console) behaves with the following properties:
* Hold accelerate for 1 second to lock it down.
* Press again to release.
* Short holds/presses do nothing (good for POSITION).
* Continue holding it during the releasing press to re-lock it.
* A small triangular UI element is added next to the speedometer sticker, which displays the current state of the acceleration kickstart for visual feedback. (NO SPLITS SUPPORT YET)
In addition:
* Add PF_ACCELDOWN and PF_BRAKEDOWN, and BT_REALACCELERATE (which ACCELDOWN tracks). Even if this feature never gets merged, BT_REALACCELERATE is required because sneakers and boosters force it on too (extending this is how I implemented it).
* Fix the dehacked playerflag list being out of shape.
* I replaced some existing flags during development of this branch, so their old uses have been whittled away.
* Becoming a spectator is now instant, and leaves no bumpable corpse behind.
* Players will now FAULT if they:
* change from a spectator into a player after the initial camera turnaround but before the end of POSITION.
* touch an instant kill FOF or get crushed during POSITION.
* become a spectator during POSITION. (I might change this later, seems overkill)
* If you respawn during POSITION, the jingle will not restart from the beginning.
* Change the FAULT animation to match spinout/currents.
* Clean up some of the spawning code to not place spectators on the ground.
* Fix the screen being stuck black at the very start of start record attack.
* Bump up the demoversion to 7, because I want all previous v2 demos to be guaranteed kaput (it was previously 4, but 7 is a nice number).
* Fix a ton MORE shitcausing misalignments in the replay system, this time specifically focused on getting ghosts functional.
* Plug a few holes in the "best lap" record implementation that allowed for stupidly easy records due to the way v2's finish lines work.
* Make a few follower-related things sane, to prevent spurious console prints that were getting in the way of my test prints.
Instead of doing its best to avoid P_DamageMobj, it embraces it, using the damagetype system to decide how the player takes damage. Overall less stupid.
So for whatever reason it's still giving me a warning about functions in i_threads having duplicate definitions, even though they clearly do not.
I'm completely stumped so I'm just gonna mess with my compile setup....... in the mean time, if anyone else could try to compile it, I'd appreciate it, so we know if it's just my end or if its something else
- Moved respawn code to its own file
- Reorganized a lot of the code related to respawning
- As a result of the massive reorganization, I squashed several bugs. Most notably: mid-game joiners having weird spawns, being able to skip laps by respawning.
- Respawn lightsnake no longer takes you straight to your nextwaypoint -- it now has a minimum distance forward that it tries to put you at when you respawn.
Basically in preperation of supporting colourblindness modes I implemented the following link when loading palettes.
http://http.developer.nvidia.com/GPUGems2/gpugems2_chapter24.html
This basically means I can do whatever the hell I want to the colour profile of incoming paletties, and nobody can stop me. Muahahahaha etc.
Also, I added a saturation feature to show off its full potential, converted gamma from a table to a factor of the calculation, tweaked some menus and made the default value of cvars show up on sliders. Because that's how I roll.
(cherry picked from commit 83e16da83b)
# Conflicts:
# src/m_menu.c
